Nabertherm LHTC 8L High-Temperature Furnaces with SiC Rod Heating (Tmax 1600C) and C550 Controller

Stock Code: 2921835
Manufacturer Part No: FUR1572

Order Now for 21 day delivery

Click Add to Quote for price and delivery

Quantity: - +

Descriptions

These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 20 - 25 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

Standard Equipment:

Tmax 1400 °C, 1500 °C, 1550 °C or 1600 °C

Working temperature 1500 °C (for high-temperature furnaces LHTC ../16), increased wear and tear must be expected in case of working at higher temperatures

Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (High-temperature furnace LHTCT 01/16 only with lift door)

Switching system with solid-state-relays, power tuned to the SiC rods

Easy replacement of heating rods

Adjustable air inlet opening, exhaust air opening in the roof

Controller C550 (10 programs with each 20 segments), alternative controllers available on request

Additional Equipment:

Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load

Protective gas connection to purge with non-flammable protective or reaction gases, not gas tight

Manual or automatic gas supply system

*This is designed to be a representation of the features available for this range. For more technical information and information on additional equipment please consult the brochure and reach out for a quote. This furnace features no safety technology for processes which produce combustible mixtures, for example debinding. If the furnace is still used for such processes despite this fact, the concentration of organic gas mixtures in the furnace must never exceed 3% of the lower explosion limit (LEL). This pre-requisite applies not only to normal operation but, in particular, to exceptional situations such as process disruptions (caused, for example, by the failure of a power unit). You must ensure that the furnace is adequately ventilated and vented. *